Sealite

SL15 1nm Solar Marine Light

The Sealite SL15 1nm compact LED light is exceptional value and incorporates some of the most advanced technology available. In the tradition of Sealite lanterns, the SL15 is designed to be maintenance-free and have a service life of over 5 years.

The SL15 can be installed in minutes, and requires no operator intervention. The flash-characters are factory-set, and the unit is supplied ready for immediate installation.

During daylight hours the solar module will charge the battery, and the lantern will automatically begin operation at dusk – once the ambient light threshold drops sufficiently.

The SL15 features the Sealite LED 360° Omnidirectional Reflector, which increases the intensity and uniformity of the horizontal output. The tough polycarbonate lens is specifically designed for use with LEDs, and incorporates an environment-friendly spike – deterring unwelcome bird life.

The unit is sealed using an advanced ultrasonic weld, enabling a rugged and completely waterproof seal capable of prolonged and deep immersion (IP68).

The SL15 is also available with an optional ON/OFF switch for temporary installations such as worksites.

SL60 2nm Solar Marine Light

The Sealite SL60 is the most popular and versatile 2nm solar marine light available. Made from tough, durable polycarbonate and using the latest high-intensity LED’s, no expense has been spared in the design and development of this lantern.

The SL60 can be installed in minutes, and requires no operator intervention. The flash-characters are easily adjusted on-site by the user, and the lantern has a permanent ON/OFF switch for easy storage.

During daylight hours the solar module will charge the battery, and the lantern will automatically begin operation at dusk – once the ambient light threshold drops sufficiently.

The SL15, SL60 and SL70 lanterns are the only compact marine lanterns available with a sealed battery compartment, allowing the battery to be replaced after years of service – don’t throw the light away at the end of the battery service life.

The unit is sealed using polycarbonate bonding compounds similar to those used by major automobile manufacturing companies.

SL70 2nm Solar Marine Light (high performance)

The SL70 is exceptional in it’s unique ability to be able to ‘track the sun’ and operate reliably in low sunlight conditions. The SL70 has been proven to operate as a 2-mile compact buoy lantern in various low-sunlight environments such as Britain, Canada, and Europe.

Made from tough, durable polycarbonate and using the latest high intensity LED’s, the SL70 lantern boasts dual high-performance solar modules incorporated into Sealite’s world-first Solar Collection Lens. These solar modules are angled to obtain maximum sunlight capture, allowing the unit to operate reliably in a range of low sunlight environments.

The SL70 can be installed in minutes, and requires no operator intervention. The flash-characters are easily adjusted on-site by the user, and the lantern has a permanent ON/OFF switch for easy storage.

The sealed battery compartment allows the battery to be replaced after years of service – don’t throw the light away at the end of the battery service life.

In high sunlight regions the SL70 may be fitted with 12 LED's and appropriate intensity settings to provide a range of up to 3 nautical miles (SL70-20).

SLC310 Compact 3nm Solar Marine Lantern

The SLC310 is a robust completely self-contained 3nm Solar LED Marine Lantern designed to fit directly onto existing 200mm OD industry standard mounts.

The unit is made from cast aluminium, subject to 7-stage powder-coating in high visibility IALA colours for daytime recognition. Four (4) premium-grade solar modules are integrated into the assembly, and mounted to collect sunlight at all angles.

The SLC310 is IP68 waterproof - designed specifically to endure a wide range of harsh marine environmental conditions including continual immersion.

The solar array charges an internal 7.5Ah battery during daylight hours, and at dusk the light will automatically begin operation.

The unit is capable of producing any of 256 IALA recommended flash characters - field-adjustable without the need for ancillary equipment.

The tough polycarbonate lens is specifically designed for use with LEDs, and incorporates an environment-friendly spike - deterring unwelcome bird life.

SLC420 Compact 4nm Solar Marine Lantern

The SLC420 is a robust completely self-contained 4nm Solar LED Marine Lantern designed to fit directly onto existing 200mm OD industry standard mounts and incorporates a 36 LED light source for even greater light intensity.

The solar array charges the 12Ah battery during daylight hours, and at dusk the light will automatically begin operation.

The unit is capable of producing any of 256 IALA recommended flash characters - field-adjustable without the need for ancillary equipment.

The tough polycarbonate lens is specifically designed for use with LEDs, and incorporates an environment-friendly spike - deterring unwelcome bird life.

The SLC420 is also available with GPS synchronisation or GSM remote monitoring

SLC300 Compact 3nm Solar Marine Lantern

The SLC300 is a completely self-contained 3nm Solar LED Marine Lantern designed for a range of low maintenance applications.

The light boasts a large internal waterproof battery compartment, a 20 LED flasher unit, and 4 premium-grade 2watt solar modules mounted to collect sunlight at all angles.

The SLC300 is moulded from UV stabilised virgin polyethylene, providing enormous impact and weather resistance, in addition to high visibility IALA colours.

The tough polycarbonate lens is specifically designed for use with LEDs, and incorporates an environment-friendly spike - deterring unwelcome bird life.

The user-friendly 2-piece design allows the lantern to be opened for convenient battery inspection or replacement whilst the base remains fixed to the supporting structure.

SLC400 Compact 4nm Solar Marine Lantern

The SLC400 is a completely self-contained compact 4nm Solar LED Marine Lantern designed for a range of low-maintenance applications.

The light boasts a large internal waterproof battery compartment, a 36 LED flasher unit, and 4 premium-grade 5watt solar modules mounted to collect sunlight at all angles.

The SLC400 is moulded from UV stabilised virgin polyethylene, providing enormous impact and weather resistance, in addition to high visibiliy IALA colours.

The tough polycarbonate lens is specifically designed for use with LEDs, and incorporates an environment-friendly spike - deterring unwelcome bird life.

The user-friendly 2-piece design allows the lantern to be opened for convenient battery inspection or replacement whilst the base remains fixed to the supporting structure.

The SLC400 is also available with internal GPS Synchronisation (SLC400-GPS) and GSM remote monitoring capabilities.

SLC600 Compact 6nm Solar Marine Lantern

The SLC600, the world's largest self-contained LED lantern, is a 6nm Solar LED Marine Lantern designed for a range of low-maintenance applications.

The light boasts a large internal battery compartment, a multiple tiered SL125 LED light-head, and 4 premium grade 20watt solar modules mounted to collect sunlight at all angles.

The SLC600 is moulded from UV stabilised virgin polyethylene, providing enormous impact and weather resistance, in addition to high visibility IALA colours.

The user-friendly 2-piece design allows the lantern to be opened for convenient battery inspection or replacement whilst the base remains fixed to the supporting structure.

The SLC600 is also available with internal GPS synchronisation (SLC600-GPS), AIS and GSM remote monitoring capabilities.

SL30/SL32 3-4nm Self-Contained Lantern

The SL30 and SL32 3-4 nautical mile LED lanterns perform exceptionally well in medium-high sunlight regions and are ideal for fixed and buoy installations including navigation, hazard lighting, perimeter lighting and a range of other applications.

The lanterns have gained wide acceptance with marine departments, and are extremely popular across Australia, and extensively used throughout the Middle East, Asia, South America and the Maldives.

The SL30 and SL32 lanterns use 20 ultra-high intensity LEDs as a light source, and incorporate a 1.3Ah sealed battery coupled with one (SL30) or two (SL32) 2watt solar module(s). As with all Sealite lanterns, the units use the Sealite LED 360 degree reflector (US Pat. No. 6,667,582 & AU Pat. No. 778,918) which increases the intensity and uniformity of the horizontal output.

These lanterns can be easily set on-site to any of over 250 IALA recommended flash characters, and any of 4 intensity settings. The 20 LED flasher units are interchangeable between lanterns, allowing the operator to replace the flasher unit with another color at any stage of the product’s life. The battery or lens can be easily replaced after years of service, and the internal components are encased in a high-impact resistant housing.

No operator intervention is required once the units have been installed. During daylight hours the solar module(s) will charge the battery through an advanced switch-mode regulator incorporated into the flasher unit. The lantern will automatically begin operation at dusk – once the ambient light threshold drops sufficiently. Coupled with LED technology, and a highly efficient DC/DC converter, the lantern may provide over 4 days of continuous operation without sunlight (14 hour darkness, 12.5% duty cycle).

The SL30 and SL32 lanterns remain the most affordable 3-4 nautical mile lights available.

SL50/SL52 3-4nm Self-Contained Lantern

The larger 5watt solar module(s) and 4.5Ah battery of the SL50 and SL52 lantern allow the units to operate at high duty cycles, or in lower sunlight regions.

The SL50 and SL52 lanterns have been widely adopted by professionals in the marine sector, including ports and harbours, transport departments, and coast guards.

The SL50 and SL52 lantern use 20 ultra-high intensity LEDs as a light source, and incorporate a 4.5Ah sealed battery and one (SL50) or two (SL52) 5watt solar module(s). As with all Sealite lanterns, the units use the Sealite LED 360 degree reflector (US Pat. No. 6,667,582 & AU Pat. No. 778,918) which increases the intensity and uniformity of the horizontal output.

These models are extremely versatile and offer the user enormous flexibility including on-site setting to any of over 250 IALA recommended flash characters, and any of 4 intensity settings. The 20 LED flasher units are interchangeable between lanterns, allowing the operator to replace the flasher unit with another color at any stage of the product’s life. The battery or lens can be easily replaced after years of service, and the internal components are encased in a large high-impact resistant housing.

Once installed, operation of the SL50 adn SL52 requires no operator intervention. During daylight hours the solar module(s) will charge the battery through an advanced switch-mode regulator incorporated into the flasher unit. The lantern will automatically begin operation at dusk – once the ambient light threshold drops sufficiently. Coupled with LED technology, and a highly efficient DC/DC converter, the lantern may provide over 10 days of continuous operation without sunlight (14 hour darkness, 12.5% duty cycle).

SL23/SL24 3-4nm Self-Contained Lantern Series

The SL23/SL24 and SL23.5/SL24.5 3-4 mile Self Contained Lantern range perform exceptionally well in low sunlight regions, or where heavy duty-cycles or a steady-light is required. The angle of tilt of the solar module is adjustable to maximise solar radiation collection in accordance to latitude. A large number are installed throughout Britain and North America, and the units are ideal for navigation, hazard lighting, perimeter lighting and a range of other applications.

The SL23/SL24 range of units use 20 ultra-high intensity LEDs as a light source, and incorporate a 7.5Ah sealed battery coupled with one 12watt (SL23), two 12watt (SL24), one 5watt (SL23.5), or two 5watt (SL24.5) solar module(s). As with all Sealite lanterns, these units use the Sealite LED 360 degree reflector (US Pat. No. 6,667,582 & AU Pat. No. 778,918) which increases the intensity and uniformity of the horizontal output.

These lanterns can be easily set on-site to any of over 250 IALA recommended flash characters, and any of 4 intensity settings. The 20 LED flasher units are interchangeable between lanterns, allowing the operator to replace the flasher unit with another colour at any stage of the product’s life. The battery or lens can be easily replaced after years of service, and the internal components are encased in a large impact-resistant housing.

Once installed, operation of the SL23/SL24 and SL23.5/SL24.5 models require no operator intervention. During daylight hours the solar module(s) will charge the battery through an advanced switch-mode regulator incorporated into the flasher unit. The lantern will automatically begin operation at dusk – once the ambient light threshold drops sufficiently. Coupled with LED technology, and a highly efficient DC/DC converter, these lanterns may provide over 20 days of continuous operation without sunlight (14 hour darkness, 12.5% duty cycle).

SL125 5-7nm LED Lantern Series

The SL125 LED marine lantern is maintenance-free and used by some of the busiest ports, and large militaries.

SL125 Technology

The SL125 is the most advanced LED marine lantern on the market. Utilising the latest software and microcircuitry developments, the lantern boast a huge number of features including flash-memory and the most efficient power conversion available.

The tough LEXAN® polycarbonate lens is specifically designed for use with LEDs, and incorporates an environment-friendly spike- deterring unwelcome bird life. The unit is sealed using polycarbonate bonding compounds similar to those used by major automobile manufacturing companies. This also enables a waterproof rating of IP68- unmatched by other manufacturers.

Lantern Operation

The SL125 is ideal to fit on existing structures, or can be supplied as a complete unit with external solar modules and battery compartment.

The large industry-standard base, and 1 metre of included cable allows the SL125 to be readily fitted to any 12 volt power supply.

Once installed, the SL125 requires no operator intervention. The flash characters are easily adjusted on-site by the user, and the lantern will automatically begin operation at dusk- once the ambient light threshold drops sufficiently.

Up to 4 tiers of 36 LEDs are available to increase the light intensity of the SL125 unit.

The SL125-2, SL125-3 and SL125-4 have 72, 108 and 144 LEDs respectively. Each LED tier utilises the Sealite omnidirectional LED Reflector (US Pat. No. 6,667,582 & AU Pat. No. 778,918) to increase the intensity and uniformity of the horizontal output. Multiple focal points on the lens then create superior divergence specifications to suit regulations worldwide.

Remote monitoring and control capabilities are available from the SL125 lantern allowing the performance of the units to be monitored from remote sites. Systems status including battery condition, flash characters, operational configurations and lantern/buoy position may be monitored through radio and satellite communications.

The SL125 4-Tier lantern utilises a unique heat-dissipating domed lens to achieve maximum LED intensity output over a wider range of environmental conditions. In addition, each LED array incorporates temperature control mechanisms to ensure maximum operational performance.

Please call us on +61 7 3633 4100 or email us for the lastest price and servicing on this equipment info@marsys.com.au